ASP5033 airspeed sensor I2C Interface

Qiotek ASP5033 Digital Air Speed Meter Sensor Kit for Pixhawk APM PIX Flight Controller RC Airplane

The ASP5033 driver has been incorporated into the ardupilot firmware. ASP5033 I2C sensor requires firmware version above arduplane 4.1 and firmware version below arduplane 4.1 or PX4 autopilot firmware, Please purchase ASP5033 CAN interface module.

In view of the fact that the official 4.1 firmware does not have a specific release date, we provide ardupilot 4.0.9 stable firmware driven by asp5033, which can be used through custom firmware flash.

At present, we can provide the following compiled flight control 4.0.9 stable firmware. If you need other flight control firmware, please contact customer service to compile it in advance. After the official version 4.1 firmware is released, we will delete the following firmware. Please use the official firmware directly.

provide for these board firmware:

CUAVv5 CUAVv5Nano  CubeBlack+ fmuv3 fmuv5 MatekF405-Wing MatekF765-Wing MatekH743 omnibusf4 omnibusf4pro  Pixhawk4  QioTekZealotF427

Firmware download link: here

By any chance contact us for technical support mail to sales@qio-tek.com.

Qiotek does not license other manufacturers to produce the sensor, Please recognize the printing on PCB Qiotek logo & website link when purchasing.

Description:

Brand: Qiotek
Item: Air speed meter
Weight: 0.06oz; 2 g
Type: ASP5033 Air Speed Meter/ ASP5033 Air Speed Meter+Air Speed Tube/ PIX Air Speed Meter/ PIX Air Speed Meter+Air Speed Tube/
The differential pressure sensor, digital output using I2C interface, the total error within the compensation range is less than 0.5%.

Automatic matching dynamic pressure & static pressure, Just the dynamic pressure and static pressure connected to the pitot tube are OK

Adopt GH1.25 terminal interface. The distribution terminal cable can be directly linked directly to the flight control I2C expansion board.

Sensor: Automatic matching dynamic pressure & static pressure

Corresponding to the connection of the airspeed tube

The arrow is installed forward of the aircraft. Connect the pitot tube two holes to the sensor holes.

Differential Pressure Sensor board

   ASP5033 is a prefect silicon pressure sensor module offering a digital IIC interface for reading differential pressure over the specified full scale pressure span and temp.range. ASP5033 is fully calibrated and temperature compensated for offset, sensitivity, temperature and non-linearity. 

Ranges: -20Pa…～+20kPa

Accuracy: +-0.2% Span

Total error band(TEB):0.5%

Over Pressure: 2X rated

Temp.Accuarcy: +-1℃
Power supply: 4.5-12V
Current consumption : <8uA(one time measurement)
Static Current: <120nA (25°C)

Operating Temperature:  -40°C~125℃
Temperature Accuracy: +-0.5@25.00℃

 Package Included:
1x ASP5033 Air Speed Meter

1x GH1.25 or SH1.25 wire

1x Industrial grade UV curing 3D printing pitot tube.