Qiotek Zealot H743


  • Brand: Qiotek
  • Product Code: Qiotek Zealot H743
  • Availability: In Stock

Available Options

The QioTek ZealotH743 is an internal vibration dampened autopilot with a protective CNC metal case for ruggedness. It features fully redundant sensors, an expanded number of outputs, temperature-controlled IMUs, and is the first high-performance autopilot with an integrated AT7456E OSD chip.


  • Processor:
    • MCU - STM32H743VIT6
    • 36KB FRAM - FM25V02
  • Standard Edition Sensors
    • Gyro/Accelerometers: ICM42688P, ICM40605, ICM20689
    • Barometers: DPS3018 *2
    • Compass: QMC5883L
  •  Industrial Edition Sensors
    • Gyro/Accelerometers: IIM42652(Invensense Industrial level sensor),ICM42688P,  ICM20689
    • Barometers: DPS3018 *2
    • Compass: QMC5883L
  •  Industry Application Edition Sensors
    1. Gyro/Accelerometers:
    2. ADIS16170(Analog Devices Industrial Application-level sensor)
    3. IIM42652(Invensense Industrial level sensor) and ICM42688P
    4. Barometers: DPS3018 *2
    5. Compass: QMC5883L
  • Power
    • 4.1-6.0V DC from USB (internal circuitry and RX only) or via 2 x PowerModule connectors, or via internal BEC off VBAT input pin. All 5V pins are powered when USB, or Power Module(s), or VBAT input is used.
    • Internal 5V, 1.5A internal BEC directly can be used with up to 6S LIPO batteries to supply board and peripheral power supply up to 1.5A max with voltage monitoring via BAT2 monitor(500ma max recommended).
    • ADC monitoring of board voltage
    • ADC monitoring of Servo/Output’s power rail
  • Interfaces/Connectivity
    • 14 PWM Outputs with independent power rail for external power source
    • 4 Relay outputs
    • MicroSD card slot
    • Micro USB or remote USB via a JST_GH connector
    • Built-in RGB LED (On three sides)
    • Built-in AT7456E OSD
    • FD-CAN interface *2
    • Two voltage & current monitoring and servo rail voltage monitoring(support to 36V)
    • Two ADC inputs(default one for RSSI, one for Airspeed sensor, both support to 6.6V)
    • Servo rail BEC independent power input for servos
    • Built-in BEC(6S 1.5A)power input(share power2 module voltage monitoring)
    • UART interface *5 
    • External safety Switch
    • External Buzzer
  • Dimensions
    • Weight 65g
    • Size 42mm x 65mm x 25mm



    Write a review

    Note: HTML is not translated!
        Bad           Good